The effect of changes in exhaust pressure (condensing pressure) on the system

The effect of changes in exhaust pressure (condensing pressure) on the system

refrigeration system


When the refrigeration system is running, the exhaust pressure corresponds to the condensation temperature, and the condensation temperature is related to the flow and temperature of its cooling medium, the amount of refrigerant injected, the efficiency of the compressor, and the amount of cooling load. When checking the refrigeration system, you can install an exhaust pressure gauge on the exhaust pipe when inspecting the refrigeration system to detect the exhaust pressure as a fault analysis data.

Factors of high exhaust pressure.

The exhaust pressure is higher than the normal value due to the following factors: low cooling medium flow rate or high cooling medium temperature, excessive refrigerant charge, heavy cooling load, etc. The above factors will increase the circulation of the system, and the condensing heat load will increase accordingly. In order to adjust the heat dissipation, the only way to increase the condensing temperature is to solve the thermal balance of the system. In the case of low cooling medium flow and high medium temperature, it reduces the heat dissipation effect of the condenser and causes the condensation temperature to rise. Another reason for the large amount of refrigerant charge is that the excess refrigerant liquid occupies part of the condenser tube, which reduces the condensation area and causes the condensation temperature to rise.

Factors of low exhaust pressure.

The condensing pressure is lower than the normal value due to the following factors: poor compressor efficiency, low refrigerant volume, low cooling load, poor filter flow and low cooling medium temperature. The above factors will cause the system’s circulation volume to decrease, the condensation load is small, and the condensation temperature decreases. From the above-mentioned changes in suction pressure and discharge pressure, the two are closely related.

 

In general, the suction pressure is high, the discharge pressure is also high; the suction pressure is low, the discharge pressure is also low; this is the operating law of the refrigeration system. When some systems cannot be equipped with an exhaust pressure gauge but can be equipped with an inhalation pressure gauge, the general situation of the exhaust pressure can also be estimated from the change in the intake pressure.

For more, please feel free to contact us.

Comments

Post a Comment

Popular posts from this blog

How to use the cold room to reduce vegetable loss?

Image
How to use the cold room to reduce vegetable loss? - CRYO SYSTEMS refrigeration Vegetable loss happens during fruit gathering, storing, transportation and sale every time. But how to avoid loss? 1. The first way is Pre-test precooling Now we need to know the main reasons for the loss of vegetables: Microbial infection:  In infected vegetables, micro-organisms are mainly fungi and bacteria, these micro-organisms are from some vegetables and farmland, such as potato late blight, carrot sclerotia, radish black rot, sick vegetables can Continue to spread hazards; some micro-organisms in the storage and transportation or even sales began to endanger the vegetable products, these microorganisms are mostly mold and corrupt bacteria, causing vegetables to grow mold, rot, smelly, causing losses. Vegetable physiological and biochemical reactions:  Vegetable harvest after a period of time, there are still breathing and other life activities, which respiration and a variety of physiologic...
Read more

6 Effective Ways to Improve Cold Storage Efficiency

Image
  6 Effective Ways to Improve Cold Storage Efficiency As we all know, the electricity consumption of cold storage and cold storage warehouses is generally relatively large, and with the steady rise in electricity costs, it is very important to improve the refrigeration efficiency of cold storage rooms. CRYO is an experienced cold storage construction expert and we thought we’d share some of the most useful and effective ways to maximize the efficiency of your cold room so you don’t waste unnecessary money on your electricity bill. Regular maintenance Maintenance plays a key role in maintaining the energy efficiency of your cold room. Taking the time to do regular inspections and checks of your cold storage can help find and fix problems before the refrigeration system fails. Also, cold storage maintenance should be done by skilled and professional workers. Regularly clean the condenser unit and evaporator coil Both the evaporator coil and the condenser unit are very important to th...
Read more

What kinds of cold room maintenance should be considered?

Image
  What kinds of cold room maintenance should be considered? Summer is coming, which means that the cold room will be used more regularly to keep food fresh and frozen, so what should be paid attention to for its maintenance? 1. Electric power for the cold room. Because electric power is used to keep the cold room running, it is important to check the electricity on a regular basis to see if the voltage is stable enough. To make sure the electricity is adequately protected? 2. The evaporator's defrost systems. If the cold room is too humid, the defrost period is set too long, or the room temperature is not properly adjusted, etc. Frost will form on the evaporator. As a result, you must ensure that the correct settings for the defrost period are specified. And, manual defrost should be used if necessary. 3. Clean the condenser. The condenser is usually placed outside, where it might collect dust. Clean the dust as soon as possible so that the whole system can function effectively. ...
Read more